Designed to measure dry materials, including grain, feed, and chips — ultrasonic sensors are an accurate, cost-effective solution for bin level measurement. Browse our selection of sensors hand-picked for use in this environment. If you need any further help selecting the right sensor for you, please reach out to our support team at [email protected].
Sensors For All Environments
Try These First!
SCXL‑MaxSonar‑WRC
Designed for applications where condensation occurs on the sensor. This sensor features a self‑cleaning transducer face, 1mm resolution, calibrated accuracy, and large target filter. Multi-sensor installations require chaining or triggered firing.
Starting at $149.95
HRXL‑MaxSonar‑WRS
Higher sensitivity than standard HR products. This may be required when detecting soft or angled targets. Initial tests should be performed with lower sensitivity sensors as high gain may cause unwanted side detections.
Each $149.95
SCXL‑MaxSonar‑WRS
Higher sensitivity than the standard SCWR products. This may be required when detecting soft or angled targets. Initial tests should be performed with lower sensitivity sensors as high gain may cause unwanted side detections.
Each $199.95
XL‑MaxSonar‑WR
Our original IP67 product. 1cm resolution and an unbeatable price.
Each $99.95
Other Sensors to Try
MB7389
Designed for tank level measurement with low amounts of condensation or icing. Sensors can easily be used in multi-sensor installations. 1mm resolution, calibrated accuracy, and large target filter.
Starting at $109.95
Sensors For Protected / Indoor Use
Try These First!
MB1220
Great for users who want to determine the range to people or other objects to distances of ~10 feet. 10Hz refresh rate.
Each $39.95
MB1010
Our best selling sensor. Great for users who want to determine the range to people or other objects to distances of ~8 feet. 20Hz refresh rate.
Each $29.95
LV-ProxSonar-EZ
Proximity version of our best selling product. Designed for applications that only want to monitor if a target is within a defined distance with even simpler integration. (T/F output can drive software switches or other electronics.) Great for people counting and automatic switches.
Each $29.95
USB-ProxSonar-EZ
Similar in function to the LV-ProxSonar sensors. These sensors feature an easy to use USB connection. Great for distributed IT networks and for a quick proof of concept from engineering. Uses the same Micro‑B USB connection as many modern cell phones.
Each $49.95
Other Sensors to Try
MB1200
The MB1200 is a great sensor for applications that require long range people detection. This sensor can detect people to ~17 feet. 10Hz refresh rate.
Each $44.95
MB1210
The MB1210 is capable of detecting people to ~12 feet. This is great for users who need the range capability of the MB1200 but want a narrower detection area than the MB1200. 10Hz refresh rate.
Each $44.95
MB1240
The MB1240 offers the narrowest detection zone and the greatest noise tolerance. Determines the range to people out to ~4 feet. 10Hz refresh rate.
Each $39.95
MB1040
Narrow detection zone similar to the MB1240. Determines the range to people out to ~3.5 feet. 20Hz refresh rate.
Each $29.95
HRUSB-MaxSonar-EZ
USB interface with a 1mm resolution and calibrated accuracy. Great for fast engineering in quick-to-market people detection and sizing applications. Sensor can easily be used in multi-sensor installations.
Each $49.95
Shop HRUSB-MaxSonar-EZ Sensors
Is your preferred interface not mentioned? Contact us!
Table Legend
Logic — Digital High/Low
AN — Analog Voltage
PW — Pulse Width
AE — Analog Envelope
I2C — I2C Bus
USB — USB Connector
RS232 — RS232 Serial
TTL — TTL Serial
Serial — RS232 or TTL serial
