Features of the MB1008, ParkSonar-EZ-132, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial.
The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle or other detectable target enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone.
The MB1008 has a detection zone of ~11 feet. The MB1008 will allow for 14+ simultaneous sensors depending on sensor mounting and environment.
Resolution of 1 inch
~10 second target acquire time*
~5 second target release time*
Automatic multi-sensor operation
Vehicle Detection Sensor
Maximum reported range of 254 inches (645 cm)
Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial
42kHz Ultrasonic sensor measures distance to objects
Virtually no sensor dead zone, objects closer than 6 inches typically range as 6 inches
Operates between 2.5 and 5.5V
Low 2.0mA average current requirement
Small, light weight module
Designed for easy integration into your project or product
Proximity Detection zone of 11 feet (132 inches)
Volume Pricing (25 or more units): Contact MaxBotix Inc.
For perfomance reasons we use Cloudflare as a CDN network. This saves a cookie "__cfduid" to apply security settings on a per-client basis. This cookie is strictly necessary for Cloudflare's security features and cannot be turned off.