Features of the MB1006, ParkSonar-EZ-108, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial.
The ParkSonar‑EZ line is designed to detect vehicles within a calibrated detection zone. The ParkSonar-EZ proximity sensors report when a vehicle, or other detectable target, enters the detection zone. The target is released after leaving the ParkSonar-EZ’s detection zone.
The MB1006 has a detection zone of ~9 feet. The MB1006 will allow for 14+ simultaneous sensors depending on sensor mounting and environment.
Resolution of 1 inch
~10 second target acquire time*
~5 second target release time*
Automatic multi-sensor operation
Vehicle Detection Sensor
Maximum reported range of 254 inches (645 cm)
Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial
42kHz Ultrasonic sensor measures distance to objects
Virtually no sensor dead zone, objects closer than 6 inches typically range as 6 inches
Operates between 2.5 and 5.5V
Low 2.0mA average current requirement
Small, light weight module
Designed for easy integration into your project or product
Proximity Detection zone of 9 feet (108 inches)
Volume Pricing (25 or more units): Contact MaxBotix Inc.
For perfomance reasons we use Cloudflare as a CDN network. This saves a cookie "__cfduid" to apply security settings on a per-client basis. This cookie is strictly necessary for Cloudflare's security features and cannot be turned off.