Features of the MB1004, ProxSonar-EZ0, include one-inch resolution, both proximity and range information for the nearest detectable target, and various output options: high/low logic level and RS232 serial.
The LV-ProxSonar‑EZ line is designed people or obstacles that enter within a calibrated detection zone. The LV-ProxSonar-EZ proximity sensors report when a person or other detectable target enters the detection zone. The target is released after leaving the LV-ProxSonar-EZ’s detection zone.
The MB1004 has a detection zone of ~7 feet. The MB1004 will allow for 6+ simultaneous sensors depending on sensor mounting and environment.
Resolution of 1 inch
~2.5 second target acquire time*
~1.5 second target release time*
Automatic multi-sensor operation
Maximum reported range of 254 inches (645 cm)
~7 foot proximity detection zone (84 inches or 213 cm)
Run up to 6+ sensors in the same environment
Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial
42kHz Ultrasonic sensor measures distance to objects
Read from sensor outputs: Serial and Pulse Width
Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches
Operates from 2.5-5.5V
Low 2.0mA average current requirement
Small, light weight module
Designed for easy integration into your project or product
For perfomance reasons we use Cloudflare as a CDN network. This saves a cookie "__cfduid" to apply security settings on a per-client basis. This cookie is strictly necessary for Cloudflare's security features and cannot be turned off.