Browse our selection of sensors hand-picked for use in this application. To read about parking garage applications, click here. If you need any further help selecting the right sensor for you, please reach out to our support team at [email protected].
Sensors For All Environments
Try These First!
HRXL‑MaxSonar‑WR
Great for installations that use multiple sensors to monitor several parking stalls. This sensor can detect vehicles to ~5 meters. The 3/4″ NPT mounting means easy installation using standard electrical boxes.
Starting at $109.95
XL‑MaxSonar‑WR
Ultra-compact for installations with custom mounting. Multiple sensor installations require chaining or triggered firing.
Starting at $99.95
I2CXL-MaxSonar-WR
Uses the I2C communication protocol for easy wiring. This sensor line is available in full size or compact housings for easy mounting and configuration.
Each $99.95
Other Sensors to Try
XL‑MaxSonar‑WR
Our original IP67 rated products. Multiple sensor installations require chaining or triggered firing.
Starting at $99.95
MB8450 Car Detection Sensor
A USB ultrasonic proximity sensor with a True/False output. Designed for various installations: drive-thru ATMs, fast‑food restaurants, pharmacies, smart parking meters, or outdoor parking garages. Well suited to multi-sensor arrays.
Each $89.95
Sensors For Protected / Indoor Use
Try These First!
ParkSonar-EZ
Provides a simple ‘True/False’ signal to indicate that a parking stall is available or occupied. Users can select the required trigger distance by model number. Large numbers of sensors can be deployed in one multi-sensor environment without interference.
Each $29.95
MB1222
I2C interface allows for a 4-wire parallel wiring method. The MB1222 offers similar sensitivity characteristics to the ParkSonar-EZ models. These sensors output range information so user code can be set to determine the appropriate trigger distance. Sensor firing should be controlled to eliminate cross talk.
Each $39.95
Other Sensors to Try
MB7360
Condensation and weather resistant sensors. Can be installed in multi-sensor environments. Testing is recommended for applications with a high density of sensors. 1mm resolution with a calibrated accuracy.
Starting at $109.95
MB7040
Condensation and weather resistant. I2C interface allows for a 4-wire parallel wiring method. These sensors output range information so user code can be set to determine the appropriate trigger distance. Sensor firing should be controlled to eliminate cross talk.
Starting at $99.95
Table Legend
| Interface | Abbrv |
|---|---|
| Digital High/Low | Logic |
| Analog Voltage | AN |
| Pulse Width | PW |
| Analog Envelope | AE |
| I2C Bus | I2C |
| USB Connector | USB |
| RS232 Serial | RS232 |
| TTL Serial | TTL |
| RS232 or TTL Serial | Serial |
