Product Description
The MB7962, MB7963, MB7964, and MB7965 Micro-B USB cables are USB2.0 compliant and backwards compatible with USB 1.0 standards.
Micro-B USB cable
USB Cable for all USB-MaxSonar Sensors
| For ble – 6ft (MB7964-000) | |
| Quantity | Cost Per Product |
|---|---|
| 5 - 9 | $9.821 |
| 10 - 49 | $9.166 |
| 50 | $6.843 |
| For ble – 3ft (MB7963-000) | |
| Quantity | Cost Per Product |
|---|---|
| 5 - 9 | $7.625 |
| 10 - 49 | $7.119 |
| 50 | $5.313 |
| For ble – 15ft (MB7965-000) | |
| Quantity | Cost Per Product |
|---|---|
| 5 - 9 | $12.018 |
| 10 - 49 | $11.224 |
| 50 | $8.372 |
| For ble – 1.5ft (MB7962-000) | |
| Quantity | Cost Per Product |
|---|---|
| 5 - 9 | $5.428 |
| 10 - 49 | $5.072 |
| 50 | $3.784 |
Product Specifications
Compatibility
The USB Micro-B cables are compatible with the following sensors:
- MB1403……………………………..HRUSB‑MaxSonar‑EZ0
- MB1413……………………………..HRUSB‑MaxSonar‑EZ1
- MB1423……………………………..HRUSB‑MaxSonar‑EZ2
- MB1433……………………………..HRUSB‑MaxSonar‑EZ3
- MB1443……………………………..UHRSB‑MaxSonar‑EZ4
- MB1414……………………………..USB‑ProxSonar‑EZ1
- MB1424……………………………..USB‑ProxSonar‑EZ2
- MB1434……………………………..USB‑ProxSonar‑EZ3
- MB1444……………………………..USB‑ProxSonar‑EZ4
- MB8450……………………………..Car Detection Sensor
Product Documentation
Part Numbers
All part numbers are a combination of a six-character base followed by a dash and a three-digit product code. Please review the following table for more information on the three-digit product code.
| M | B | 7 | 9 | 6 | 2 | – | 0 | 0 | 0 | ||||||||||
| Base | |||||||||||||||||||
| Housing Style | |||||||||||||||||||
| 0 | Not Applicable | ||||||||||||||||||
| 1 | 3/4″ NPS WR | ||||||||||||||||||
| 2 | 3/4″ NPS WRC | ||||||||||||||||||
| 3 | Ultra Compact | ||||||||||||||||||
| 4 | Ultra Compact Flush Mount | ||||||||||||||||||
| 5 | 1″ NPS | ||||||||||||||||||
| 6 | 1″ BSPP | ||||||||||||||||||
| 7 | 30MM 1.5 | ||||||||||||||||||
| 8 | Extended Horn | ||||||||||||||||||
| Options Selected | |||||||||||||||||||
| 0 | No Options (Bagged) | ||||||||||||||||||
| 1 | F-Option | ||||||||||||||||||
| 2 | P-Option | ||||||||||||||||||
| 3 | F-Option and P-Option | ||||||||||||||||||
| 4 | No Options (Trayed) | ||||||||||||||||||
| 5 | TTL (Bagged) | ||||||||||||||||||
| 6 | TTL (Trayed) | ||||||||||||||||||
| Wire Attach | |||||||||||||||||||
| 0 | No Wire Attach | ||||||||||||||||||
| 1 | Wire Attached | ||||||||||||||||||
The following table displays all of the active and valid part numbers for this product.
| Active Part Numbers |
| MB7962-000 | MB7963-000 | MB7964-000 | MB7965-000 |
Related Products
-
MB7986 Voltage Regulator Board
Used to help minimize spikes and noise found in the power supply to your devices.
View Product From: $18.34 -
MB7985 Radio Bridge Connector
To ensure easy integration with the Radio Bridge interface, we provide a 5ft cable to connect your sensor to the LoRaWAN Bridge.
View Product $0.00 -
-
Shielded Cable Attach *
Connects shielded cable to the pin-out below a sealed cap providing a full IP67 seal. Select this option on the applicable product page to purchase.
View Product $72.36
