MaxBotix Inc., High Performance Ultrasonic Rangefinders
Follow MaxBotix:
 
RoHs Compliant

MB1040 LV-MaxSonar®-EZ4™

High Performance Ultrasonic Rangefinder
 
 
LV-EZ Ultrasonic Range Finder LV-EZ Ultrasonic Range Finder 5Pack LV-EZ Ultrasonic Range Finder 10Pack
LV-MaxSonar-EZ4 Each, $29.95
LV-MaxSonar-EZ4
5-Pack, $139.75
LV-MaxSonar-EZ4
10-Pack, $249.50
 
For larger quantities, please contact MaxBotix Inc. for pricing.

MB1040 Datasheet

MB1040 Ultrasonic Rangefinder Datasheet

 

Product Description

 

The LV-MaxSonar-EZ4 is the narrowest beam width sensor that is also the least sensitive to side objects offered in the LV-MaxSonar-EZ sensor line. The LV-MaxSonar-EZ4 is an excellent choice when only larger objects need to be detected.

Component Overview

  • 42kHz Ultrasonic sensor measures distance to objects
  • RoHS Compliant
  • Read from all 3 sensor outputs: Analog Voltage, Serial, Pulse Width
  • Virtually No sensor dead zone, objects closer than 6 inches range as 6 inches
  • Resolution of 1 inch
  • Maximum Range of 254 inches (645 cm)
  • Operates from 2.5-5.5V
  • Low 2.0mA average current requirement
  • 20Hz reading rate
  • Small, light weight module
  • Designed for easy integration into your project or product
  • Narrowest beam of the LV-MaxSonar-EZ sensors
  • Best for large object detection applications
  • Volume Pricing (25 or more units): Contact MaxBotix Inc.

Product Documentation

MB1040 Datasheet.........................LV-MaxSonar-EZ4-datasheet
Ultrasonic Sensor Selection Guide.....Ultrasonic Sensor Selection Guide
LV Chaining Application Notes..........LV AN Output Commanded Loop
LV Chaining Application Notes..........LV AN Output Constantly Looping
LV Chaining Application Notes..........LV AN Output Simultaneous Operation
Quick Start Guide..........................LV-MaxSonar-EZ1 Quick Start Guide

LV-MaxSonar-EZ1 QuickStart Guide
Author: CJM & TEB     Date: 01/06/2012
LV-MaxSonar-EZ1 Quick Start Guide
Welcome FRC 2012!

This step by step guide walks you through the initial setup of a MB1010 LV‑MaxSonar‑EZ1 Ultrasonic Sensor.
Sensor Noise Tolerance
Author: Scott Wielenberg  Date: 11/21/2011
Sensor Noise
MaxBotix Inc. Recently performed an acoustic noise tolerance test on the LV-MaxSonar-EZ and XL-MaxSonar-EZ products.
The test was setup to evaluate the real world use of the sensors, to allow comparison between MaxBotix Inc., sensors. A noise source was used that produced a pulsating acoustic source of 30KHz to 50KHz sweep at a 60Hz rate. This caused large spikes of noise within the sensor frequency band.
News Archive