Welcome FRC 2012!
This step by step guide walks you through the initial setup of a MB1010 LV‑MaxSonar‑EZ1 Ultrasonic Sensor.
This step by step guide walks you through the initial setup of a MB1010 LV‑MaxSonar‑EZ1 Ultrasonic Sensor.
MaxBotix Inc. Recently performed an acoustic noise tolerance test on the LV-MaxSonar-EZ and XL-MaxSonar-EZ products.
The test was setup to evaluate the real world use of the sensors, to allow comparison between MaxBotix Inc., sensors. A noise source was used that produced a pulsating acoustic source of 30KHz to 50KHz sweep at a 60Hz rate. This caused large spikes of noise within the sensor frequency band.