Search results

High Performance Shielded Cable. Cable sold by the foot as a single continuous section.

MB7955 HR‑MaxTemp PCB and Heat Shrink

MB7956 MaxTemp cable sold per foot i.e. 1 ft = qty 1 (Purchased with the MB7955)

MB7957 HR-MaxTemp PCB, heat Shrink, and 3 feet of cable

MB7958 Assembled HR‑MaxTemp with 3 feet of cable

MB7959 Assembled HR‑MaxTemp with 6 feet of cable

MB7972 Assembled HR‑MaxTemp with 20 feet of cable

The HR-MaxTemp is designed to be used alongside the HR-MaxSonar sensors. The HR-MaxSonar sensor upon power-up will automatically detect an attached temperature sensor and begin to apply temperature compensation for the speed of sound changes to all range outputs.

The MB7962, MB7963, MB7964, and MB7965 Micro-B USB cables are USB2.0 compliant and backwards compatible with USB 1.0 standards.

Ultrasonic snow depth sensor for weather stations and environmental monitoring. 5 m maximum range, 1 mm resolution, and internal temperature compensation.

Standard (~6 Hz Update Rate) or condensation self-cleaning (~0.5 Hz Update Rate) variants. RS232 or TTL serial plus analog voltage and pulse-width outputs. 

Near-field handling is built in: targets closer than 500 mm report as 500 mm for predictable readings.

Ranges from 300mm to 5000mm with a 6.7Hz read rate. Pulse-width, analog voltage, and RS232 serial. Reports range to largest target.

Ranges from 20cm up to 765cm* with a 10Hz read rate. Analog envelope, analog voltage, and RS232 serial. Reports range to largest target. Uses a stability filter.

MB7851 is a weather-resistant ultrasonic tank-level sensor with 1 mm resolution, 5 m max range, and ~2 Hz read rate. Output is selectable by wiring—RS232 or TTL serial, scaled analog voltage, or analog envelope; supply 3.0–5.5 VDC

Near-field handling is built in: targets closer than 50 mm are reported as 50 mm for predictable readings.

(Optional at purchase: 4–20 mA; requires 9–36 VDC and replaces standard outputs). 

Ranges from 20cm to 1068cm with a 10Hz read rate. Analog envelope, analog voltage, and RS232 serial. Reports range to closest target.

The 5m Ultrasonic + IR Kiosk Proximity Sensor is a compact, low-voltage IR + ultrasonic sensor designed for kiosk and people-detection applications. By combining optical proximity sensing with ultrasonic ranging, it offers dependable object detection from the front face out to 5 m, with 1 mm resolution and range measurements from 30 cm to 5 m. 

Each sensor auto-calibrates for temperature, supply voltage, and target characteristics, delivering stable readings even in acoustically noisy indoor environments. USB and QWIIC-I2C variants simplify connection to computers and embedded systems while keeping the sensor dimensions under two cubic inches for easy mounting.

Connector Header Through Hole 7 position 0.100″ (2.54mm)

The Flood Level Ultrasonic Sensor provides highly accurate non-contact measurement for flood detection and water level monitoring. With 1 mm resolution and models available in 5 m and 10 m max ranges, this sensor is designed for reliable operation in stormwater, municipal, and environmental monitoring applications.

Near-field handling is built in: targets closer than minimum range are reported as minimum range for predictable readings (300mm on 5m models and 500mm on 10m models.)

(Optional at purchase: 4–20 mA; requires 9–36 VDC and replaces standard outputs).

Ranges from 500mm to 5000mm with a 0.6Hz read rate. Pulse-width, analog voltage, and RS232 serial. Reports range to closest target.