Multi-Sensor Test and Results

Multi-Sensor Test and Results

Test Setup MaxBotix Inc has recently tested operation of our MB7360 HRXL‑MaxSonar‑WR in a multi-sensor environment. The testing was conducted from 11/15/2012 to 11/19/2012. The following presents the test data from a four day, three sensor test to verify multi­sensor operation for the MB7360 ultrasonic sensor. The sensors tested were the MB7360 in free run…
Read More

MaxSonar Sensor Acoustic Noise Tolerance Test

MaxSonar Sensor Acoustic Noise Tolerance Test

 It’s a little-known fact that all of our MaxSonar products have been designed with a high acoustic noise tolerance. This means that the MaxSonar sensors from all of our product lines work to reduce or eliminate false detections caused by external noise sources. While acoustic noise tolerance is only a small part of our “sensor…
Read More

MEAN TIME BETWEEN FAILURE

Ultrasonic Sensor Mean Time Between Failure (MTBF)

To read the full PDF article click here This test was conducted to verify and document the reliability of the MaxSonar product lines. Test parameters were selected that, if met, would establish and verify a mean time between failure (MTBF) of at least 200,000 hours. Additionally, industry practice states that product performance at temperature extremes (-40°C,…
Read More

MAXSONAR® SENSORS IN A FEATURE ARTICLE IN THE JUNE 2008 SERVO MAGAZINE

MaxSonar® Sensors in a feature article in the June 2008 Servo Magazine

In the past three years, a few articles have been written about our sensors, but the latest one by Fred Eady, is the most detailed article to date. We first learned about this article after the June 2008 Servo Magazine arrived in our mailbox. This article takes up almost ten percent of the June 2008…
Read More


MaxBotix Inc.