Argentina based company FDX Ingeniería de Desarrollo uses MaxBotix sensors in their IoT level transmitter for wastewater. In addition to monitoring wastewater, river level monitoring has been a focus for the past 4 years.
While building their solution, FDX realized, power supply, data storage and communication are typical challenges associated with remote measurements.
FDX’s data logger family offers a comprehensive solution, making any implementation simpler.
With a built-in ultrasonic sensor, their FDX-RA1-3G is a low power, battery supplied level sensing unit that communicates with 3G.
For local configuration, Hotspot can also be used.
Characteristics of the Unit
|Ultra low power consumption: <100uA in sleep mode.||Internal storage for +10000 samples.|
|Unlimited external storage on FDX-GT or FDX-CLOUD.||Internal temperature and humidity measurement.|
|IP68 protection.||Remote configuration via FDX-GT or FDX-CLOUD.|
|Internal battery power supply with one year life under the following conditions: 1 measurement and 1 transmission every 1 hour.|
- Levels of water effluents are monitored.
- Monitoring the levels of sewage liquid
- Network pressure remote monitoring
Not sure if our sensors would be the right fit for your application?
Click the button below to contact our team to discuss your project needs.